Flume Filter, Adjustable from 36" - 60"
The flume filter is used to protect slope drains. Installation is easy: simply place the filter on the ground between curbs, adjusting the width to fit snugly in place. Then clamp down with Tapcon screws or Ramset shot. This will filter all water runoff from curb or parking lot areas, while trapping debris, and trash, keeping your swales and ditches clean!
To service your flume filter, grasp the maintenance straps, roll the cage forward, and empty debris.
Custom Sizing is available!
Made in the U.S.A!
|Material||Agrutex 120 HUV|
|Mass/Unit Area (g/m)||12 (407)||ASTM D-5261|
|Grab Tensile, lbs (N)||205 (979)||ASTM D-4632|
|Elongation, %||50||ASTM D-4632|
|CBR Puncture, lbs (kN)||600 (2.7)||ASTM D-6241|
|Trapezoidal Tear, lbs (N)||95 (423)||ASTM D-4533|
|UV Resistance % Strength Retained after 2000 hrs||70||ASTM D-4355|
|Apparent Opening Size, US Sieve (mm)||80 (0.180)||ASTM D-4751|
|Permittivity, sec||0.8||ASTM D-4491|
|Permeability cm/sec||0.29||ASTM D-4491|
|Water Flow Rate, g/min/sf (l/min/m)||60 (2445)||ASTM D-4491|
|Hydrocarbons Capacity||9x it’s weight in hydrocarbons||ASTM F726-81|
|Debris Capacity||272 lbs, or 25 gallons|